The automobile fault code P1352 indicates a problem with the Ignition Control Module. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. The cause of this fault code can be a faulty Ignition Control Module, an open or shorted harness, or a poor electrical connection in the module circuit.
To fix this issue, you should visually inspect the wiring harness and connectors for any damage.
Look for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this problem is estimated to be around 1.0 hour.
To interpret the fault code, check the “Possible Causes” listed above and follow the recommended steps for inspection and repair.
Repair Importance Level | 10.0 (Out of 10) |
Estimated Repair Time | Approximately 1.0 hour |
Repair Difficulty Level | 6.67 (Out of 10) |
Unveiling The Mystery: Symptoms Of Fault Code P1352 Revealed!
If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the p1352 fault code.
- The symptoms of the automobile fault code p1352 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unraveling The Mystery: What Causes Fault Code P1352?
The automobile fault code p1352 can be caused by a faulty Ignition Control Module, an open or shorted Ignition Control Module harness, or a poor electrical connection in the Ignition Control Module circuit.
- Pinpoints your car-specific issues, giving accurate diagnostics for your exact make and model.
- Works anywhere, even with limited connectivity, making it highly versatile.
- Provides detailed insights into real-time performance for your exact make and model, beyond generic online explanations.
- Tracks past issues of your vehicle, helping you spot recurring problems and monitor long-term performance, which online resources can’t offer.
- Detects potential issues early, helping avoid costly repairs instead of just addressing current problems.
- Regular checks support efficiency and emissions standards, potentially increasing resale value—hard to gauge with online info alone.
- The fault code P1352 can be caused by: a faulty Ignition Control Module, an open or shorted Ignition Control Module harness, and a poor electrical connection in the Ignition Control Module circuit.
Fixing Code P1352: Simple Steps To Get Your Car Running Smoothly!
To fix the p1352 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p1352, you need to follow these steps: 1.
- Check the possible causes mentioned above.
- 2.
- Visually inspect the wiring harness and connectors related to the fault code.
- 3.
- Look for any damaged components.
- 4.
- Check for broken, bent, pushed out, or corroded pins in the connectors.
- 5.
- Repairing this fault code is estimated to take approximately 1.0 hour.
Cracking The Code: P1352 Fixing Cost And Complexity Unveiled!
The fault code p1352 can be diagnosed and fixed within an estimated repair time of 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for such repairs.
P1352 Fault Code: Ignition Coil B Circuit Malfunction Explained
The P1352 fault code indicates that the Ignition Control Module (ICM) has detected a high output or pulse when the grounded cylinder is expected. The ICM has independent power and ground circuits, and it communicates with the Powertrain Control Module (PCM) through various circuits. The ICM sends 3X signals to the PCM and controls the timing advance during engine cranking.
After the PCM receives the second 3X signal, it applies 5 volts to the ignition control (IC) timing signal circuit, and the timing advance changes to PCM control. The ICM monitors the CKP sync signal during engine cranking, which is used to determine the correct cylinder pair and initiate the ignition coil firing sequence.
The P1352 code suggests that there may be an issue with the ICM output, specifically a high output or pulse when the grounded cylinder is expected. This fault code may require further diagnosis to determine the exact cause and appropriate fix.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P1352 could be the culprit. This code is often caused by a faulty ignition control module, an open or shorted ignition control module harness, or a poor electrical connection in the ignition control module circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for further troubleshooting.
If you’re dealing with the P1352 fault code and your engine light is on, it’s time to take action. The culprit could be a faulty Ignition Control Module or issues with the wiring harness and connectors. To fix this, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. This simple step could be the key to resolving the issue and getting your engine running smoothly again. Don’t delay, check those connections now!
When resolving the P1352 fault code, start by checking for damaged components and connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded connector pins. These issues can cause a poor electrical connection or an open/short circuit in the Ignition Control Module. By addressing these potential causes, you can effectively fix the problem and clear the Engine Light or Service Engine Soon Warning Light.
Wrap Up
If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Ignition Control Module or issues with the module’s harness or electrical connection. To fix this, visually inspect the wiring harness and connectors, checking for any damage or corrosion.
Look out for broken, bent, pushed out, or corroded connector pins.