[SOLVED] P133F Code: Cylinder 8 Glow Plug Offset – Fix And Prevent!

The automobile fault code P133F indicates a problem with the Glow Plug 8 in the vehicle. The symptoms of this fault code may include poor engine performance and difficulty starting the engine. The cause of this issue could be a faulty Glow Plug 8 or a problem with the wiring harness or connectors associated with it.

To fix this problem, you should visually inspect the wiring harness and connectors for any damage or corrosion.

Additionally, check for any broken, bent, or pushed out connector pins.

This repair is of moderate difficulty and should take approximately 1.0 hour to complete.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

Experiencing rough idling, poor acceleration, and engine misfires? Check out the symptoms of fault code P133F below.

  • The symptoms of automobile fault code P133F may include rough idling, engine misfires, decreased fuel efficiency, hesitation or stumbling during acceleration, and an illuminated check engine light.

The automobile fault code P133F can be caused by various factors, including a faulty Glow Plug 8, an open or shorted Glow Plug 8 harness, and a poor electrical connection in the Glow Plug 8 circuit.

INNOVA 5210
Get an OBD Scanner for accurate, Your car-specific Error Diagnosis
  • Pinpoints your car-specific issues, giving accurate diagnostics for your exact make and model.
  • Works anywhere, even with limited connectivity, making it highly versatile.
  • Provides detailed insights into real-time performance for your exact make and model, beyond generic online explanations.
  • Tracks past issues of your vehicle, helping you spot recurring problems and monitor long-term performance, which online resources can’t offer.
  • Detects potential issues early, helping avoid costly repairs instead of just addressing current problems.
  • Regular checks support efficiency and emissions standards, potentially increasing resale value—hard to gauge with online info alone.
Buying through our links may earn us commission.

  • The fault code P133F can be caused by the following: – Failure to perform the Glow Plug Learn procedure.
  • – A faulty Glow Plug 8.
  • – An open or shorted harness for Glow Plug 8.
  • – Poor electrical connection in the Glow Plug 8 circuit.

To fix the automobile fault code p133f, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code P133F, you need to follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • 5.
  • Repairing this fault code is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p133f are the estimated repair time of 1.0 hour and the hourly rate charged by auto repair shops, which typically ranges between $75 and $150.

When you see the Engine Light ON or the Service Engine Soon Warning Light, it could be indicating a fault code of p133f. This code typically points to an issue with the engine’s camshaft position sensor. The camshaft position sensor is responsible for monitoring the position of the camshaft and sending this information to the engine control module (ECM).

A faulty camshaft position sensor can lead to various symptoms, such as rough idling, poor acceleration, and even stalling of the engine. It can also cause issues with the timing of the engine, resulting in decreased fuel efficiency and increased emissions. Ignoring this fault code can lead to further damage to the engine and potentially more expensive repairs down the line.

To fix the p133f fault code, the camshaft position sensor may need to be replaced. It is recommended to have a professional mechanic diagnose and repair the issue to ensure proper installation and avoid any further complications.

Taking prompt action to address this fault code will help maintain the performance and longevity of your vehicle’s engine.

What are the possible causes of fault code P133F in an automobile?

The fault code P133F in an automobile can be caused by a few different factors. One possible cause is the need to perform the Glow Plug Learn procedure. Another potential cause is a faulty Glow Plug 8. Additionally, the issue could be related to an open or shorted harness for Glow Plug 8, or a poor electrical connection in the Glow Plug 8 circuit. To fix this problem, it is recommended to visually inspect the wiring harness and connectors, checking for any damage or corrosion. It is also important to look for any broken, bent, pushed out, or corroded pins in the connectors.

How can I identify if the glow plug 8 harness is open or shorted in relation to fault code P133F?

To identify if the glow plug 8 harness is open or shorted in relation to fault code P133F, you can start by performing the Glow Plug Learn procedure. If the fault persists, it could be due to a faulty Glow Plug 8 or a poor electrical connection in the Glow Plug 8 circuit. To fix this issue, visually inspect the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded pins in the connectors. This will help you determine if the harness is open or shorted and take appropriate action.

What steps should I take to visually inspect the wiring harness and connectors to fix fault code P133F?

To fix fault code P133F, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This will help identify if the issue lies with the faulty glow plug, an open or shorted harness, or a poor electrical connection in the glow plug circuit. Make sure to perform the Glow Plug Learn procedure as well.

p133f error fault code explained

To fix the P133F fault code, start by performing the Glow Plug Learn procedure. Next, visually inspect the wiring harness and connectors for any damage.

Check for broken, bent, pushed out, or corroded pins on the connectors.

Address any issues found to ensure proper electrical connection.

Scroll to Top