[SOLVED] P1323 Code: Fix Low Frequency 24X Reference Circuit With Ease!

The automobile fault code P1323 indicates a problem with the 24X CKP sensor. Symptoms may include engine misfires, rough idling, or difficulty starting the vehicle. The cause of this fault code could be a faulty 24X CKP sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit.

To fix this issue, visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins in the connectors. Repairing this problem may take approximately 1.0 hour.

To interpret the fault code, check the “Possible Causes” listed above and follow the recommended steps for inspection and repair.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

Experiencing rough idling, misfires, and decreased engine performance? Check out the symptoms of fault code p1323 below.

  • The symptoms of automobile fault code P1323 may include rough idling, engine misfires, decreased engine performance, difficulty starting the vehicle, and an illuminated check engine light.

The automobile fault code P1323 can be caused by a faulty 24X CKP sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit.

  • The fault code P1323 can be caused by the following: a faulty 24X CKP sensor, an open or shorted harness for the 24X CKP sensor, and a poor electrical connection in the 24X CKP sensor circuit.

To fix the p1323 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p1323, you need to follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • The estimated repair time for this fix is 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p1323 are the estimated repair time of 1.0 hour and the typical auto repair shop charges of $75 to $150 per hour.

When you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the fault code P1323.

This code indicates an issue with the Ignition Coil Primary Feedback Circuit. It means that there is a problem with the feedback signal from the ignition coil to the engine control module (ECM). The symptoms of this fault code may include rough idling, misfires, and a decrease in engine performance.

You may also experience difficulty starting the vehicle or notice a decrease in fuel efficiency. It is important to address this issue promptly to prevent further damage to the engine and ensure optimal performance. To fix the P1323 fault code, you should start by inspecting the wiring and connectors related to the ignition coil.

Look for any signs of damage, corrosion, or loose connections.

If any issues are found, repair or replace the affected components as necessary.

Additionally, it is recommended to check the ignition coil itself for any signs of malfunction. If the coil is faulty, it should be replaced with a new one. Remember, ignoring the P1323 fault code can lead to more severe engine problems and potentially leave you stranded on the road.

So, it’s best to address this issue promptly to keep your vehicle running smoothly and efficiently.

What are the possible causes of fault code P1323 in an automobile?

The fault code P1323 in an automobile can be caused by a faulty 24X CKP sensor, an open or shorted 24X CKP sensor harness, or a poor electrical connection in the 24X CKP sensor circuit. To fix this issue, visually inspect the wiring harness and connectors, checking for any damage or broken, bent, pushed out, or corroded pins in the connectors. Additionally, refer to the “Possible Causes” listed above for further troubleshooting.

How can I visually inspect the wiring harness and connectors to fix fault code P1323?

To fix fault code P1323, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This will help identify any issues with the 24X CKP sensor or its circuit. By checking and addressing these possible causes, you can effectively resolve the fault code.

What should I look for when checking for damaged components and connector pins to resolve fault code P1323?

To resolve fault code P1323, start by visually inspecting the wiring harness and connectors. Look for any signs of damage or corrosion. Pay close attention to the 24X CKP sensor and its circuit. Check for broken, bent, pushed out, or corroded connector pins. These issues can cause a poor electrical connection and lead to the fault code. By identifying and addressing any damaged components or connector pins, you can effectively resolve the issue.

p1323 error fault code explained

If you’re experiencing issues with your vehicle and the fault code P1323 pops up, it could be due to a faulty 24X CKP sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit. To fix this, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Look out for broken, bent, pushed out, or corroded pins on the connectors.

Scroll to Top