[SOLVED] P1244 Code – Fix Alternator Load Input High Failure Now!

Are you wondering what the automobile fault code P1244 means? Well, when you see the Engine Light ON or the Service Engine Soon Warning Light, it could be indicating a problem with your alternator or generator.

The cause of this fault code could be a faulty alternatorgenerator, an open or shorted harness, a poor electrical connection in the circuit, or even a damaged Powertrain Control Module (PCM).

To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Look out for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this problem is estimated to be around 1.0.

So, if you encounter this fault code, make sure to address it promptly to avoid any further complications.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p1244 fault code.

  • The symptoms of the automobile fault code p1244 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p1244 can be caused by a faulty alternatorgenerator, open or shorted harness, poor electrical connection in the circuit, or a damaged Powertrain Control Module (PCM).

  • The fault code P1244 can be caused by a faulty alternator/generator, an open or shorted harness for the alternator/generator, a poor electrical connection in the alternator/generator circuit, or a damaged Powertrain Control Module (PCM).

To fix fault code p1244, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p1244, follow these steps: 1.
  • Check the possible causes mentioned above.
  • 2.
  • Visually inspect the wiring harness and connectors related to the fault code.
  • 3.
  • Look for any damaged components.
  • 4.
  • Check for broken, bent, pushed out, or corroded pins in the connectors.
  • 5.
  • Repair time estimated at 1.0 hour.

The automobile fault code P1244 can be diagnosed and fixed within an estimated repair time of 1.0 hour.

The cost of the repair will depend on the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.

The P1244 fault code refers to a problem with the alternator load input in the vehicle’s powertrain control module (PCM). The PCM constantly monitors the load from the generatorregulator in terms of frequency. However, this fault code indicates that the input is lower than what it should be during normal operation.

In some cases, this could be due to a high load input caused by a battery short to ground.

Overall, the P1244 code signifies that the alternator load input has failed high.

What are the possible causes of fault code P1244 and how can they be visually inspected?

If you’re seeing the engine light or service engine soon warning light and have fault code P1244, there are a few possible causes to consider. It could be a faulty alternator/generator, an open or shorted harness, a poor electrical connection in the alternator/generator circuit, or a damaged powertrain control module (PCM). To visually inspect these potential causes, check the wiring harness and connectors related to the alternator/generator. Look for any damaged components and examine the connector’s pins for any signs of being broken, bent, pushed out, or corroded.

How does a faulty alternator/generator contribute to the engine light being on and what steps can be taken to fix it?

If you notice that your engine light is on or you see a service engine soon warning light, a possible cause could be a faulty alternator or generator. To fix this issue, start by checking the possible causes mentioned above. Take a close look at the wiring harness and connectors related to the alternator or generator. Make sure there are no visible damages or issues with the components. Additionally, check for any broken, bent, pushed out, or corroded pins in the connectors.

What should be checked in the powertrain control module (PCM) when encountering fault code P1244 and how can damaged components or connectors be identified?

If you encounter fault code P1244 in the powertrain control module (PCM), there are a few things you should check. The symptom is an engine light or service engine soon warning light being on. The cause could be a faulty alternator/generator, an open or shorted harness, a poor electrical connection in the circuit, or a damaged PCM. To identify damaged components or connectors, visually inspect the related wiring harness and connectors. Look for broken, bent, pushed out, or corroded pins on the connectors. It’s important to check these possible causes and inspect the components thoroughly.

p1244 error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty AlternatorGenerator, an open or shorted harness, a poor electrical connection in the circuit, or a damaged Powertrain Control Module (PCM).

To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top