If you see the engine light on or the service engine soon warning light, it could be due to the automobile fault code P117C. This code is typically caused by a faulty oxygen sensor, an open or shorted oxygen sensor harness, a poor electrical connection in the oxygen sensor circuit, a cylinder misfire, or a richlean air fuel ratio.
To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or broken pins.
The repair time for this code is estimated to be around 1.0.
Remember to interpret the fault code by checking the possible causes mentioned above.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
P117C Fault Code Symptoms: Unveiling The Telltale Signs Of Trouble
When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p117c fault code.
- The symptoms of the automobile fault code p117c include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.
Unveiling The Culprits: Decoding The Causes Of Code P117C
The automobile fault code p117c can be caused by a faulty oxygen sensor, open or shorted oxygen sensor harness, poor electrical connection in the oxygen sensor circuit, cylinder misfire, or a richlean air fuel ratio.
- The fault code P117C can be caused by a faulty oxygen sensor, an open or shorted oxygen sensor harness, a poor electrical connection in the oxygen sensor circuit, a cylinder misfire, or a rich/lean air fuel ratio.
Fixing Code P117C: Simple Steps To Resolve The Fault
To fix fault code p117c, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.
- To fix the automobile fault code p117c, start by checking the possible causes mentioned above.
- Then, visually inspect the wiring harness and connectors related to the issue.
- Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
- The estimated repair time for this fix is 1.0 hour.
Cracking The Code: P117C – Cost And Complexity Unveiled!
The automobile fault code p117c can be diagnosed and fixed within an estimated repair time of 1.0 hour. The cost of the repair will depend on the hourly rate charged by the auto repair shop, which typically ranges between $75 and $150 per hour.
P117C Fault Code: Understanding The Description And Troubleshooting Tips
The P117C fault code refers to a problem with the Bank 3 Oxygen Sensor. The Engine Control Module (ECM) is responsible for monitoring this sensor.
When the sensor is not operating within the factory specifications, the ECM will set the P117C code.
This code specifically indicates that there is a lean condition in the Bank 3 Oxygen Sensor correction behind the converter.
It is important to address this issue promptly to ensure optimal performance and efficiency of the vehicle.
FAQ
If you see the engine light or service engine soon warning light on, the fault code P117C could be the culprit. This code is often caused by a faulty oxygen sensor, an open or shorted oxygen sensor harness, a poor electrical connection in the oxygen sensor circuit, a cylinder misfire, or a rich/lean air fuel ratio. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
If you’re dealing with the P117C fault code and your engine light is on, it’s time to take action. The cause could be a faulty oxygen sensor, an open or shorted oxygen sensor harness, poor electrical connection in the oxygen sensor circuit, cylinder misfire, or a rich/lean air fuel ratio. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t delay, get to the bottom of this problem and get your engine running smoothly again.
When resolving the P117C fault code, start by checking for damaged components and connector pins. Visually inspect the wiring harness and connectors for any signs of damage. Look for broken, bent, pushed out, or corroded pins in the connectors. This can help identify any issues with the oxygen sensor, its harness, or the electrical connection. Don’t forget to also consider other possible causes like cylinder misfire or a rich/lean air fuel ratio.
Wrap Up
If your engine light is on, it could be due to a faulty oxygen sensor, open or shorted sensor harness, poor electrical connection, cylinder misfire, or richlean air fuel ratio.
To fix it, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.
