[SOLVED] P10Cd Code: Fixing Low Voltage In Exhaust Aftertreatment Fuel Injector

The automobile fault code P10CD indicates a problem with the Fuel Indirect Injector. When this fault code appears, you may notice that the Engine Light is ON or the Service Engine Soon Warning Light is illuminated.

The cause of this issue could be a faulty Fuel Indirect Injector, an open or shorted Fuel Indirect Injector harness, or a poor electrical connection in the Fuel Indirect Injector circuit. To fix this problem, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion.

Additionally, look out for broken, bent, pushed out, or corroded connector pins. The repair for this fault code is estimated to take around 1.0 hour. To interpret the fault code, refer to the “Possible Causes” listed above and follow the recommended steps for inspection and repair.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p10cd fault code.

  • The symptoms of the automobile fault code P10CD include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p10cd can be caused by a faulty fuel indirect injector, an open or shorted harness, or a poor electrical connection in the injector circuit.

  • The fault code P10CD can be caused by the following: a faulty fuel indirect injector, an open or shorted harness for the fuel indirect injector, and a poor electrical connection in the fuel indirect injector circuit.

To fix the automobile fault code p10cd, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p10cd, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded pins on the connectors.
  • This fix should take approximately 1.0 hour.

The fault code P10CD is associated with a specific diagnosis and fixing cost based on the estimated repair time of 1.0 hour.

Auto repair shops typically charge between $75 and $150 per hour for this type of repair.

The P10CD fault code is related to the Indirect Injector in the automobile’s Powertrain Control Module (PCM).

When the Indirect Injector does not meet the factory specifications, the PCM detects this and triggers the OBDII code.

The specific issue indicated by the P10CD code is the Exhaust Aftertreatment Fuel Injector High Control Circuit having a low voltage.

This fault code alerts the driver or mechanic that there is a problem with the control circuit of the fuel injector in the exhaust aftertreatment system. It is important to address this issue promptly to ensure proper functioning of the vehicle’s fuel injection system and exhaust aftertreatment components.

What are the possible causes for the automobile fault code P10CD?

If you see the engine light or service engine soon warning light on, the fault code P10CD could be the culprit. This code is often caused by a faulty fuel indirect injector, an open or shorted fuel indirect injector harness, or a poor electrical connection in the fuel indirect injector circuit. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. Don’t forget to check the possible causes listed above for a more comprehensive solution.

How can I visually inspect the wiring harness and connectors to fix the P10CD fault code?

To fix the P10CD fault code, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This can help identify if the issue lies with a faulty fuel indirect injector, an open or shorted harness, or a poor electrical connection in the circuit. Take note of any findings to further troubleshoot and resolve the problem.

What should I look for when checking for damaged components and connector’s pins to resolve the P10CD fault code?

When resolving the P10CD fault code, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. These issues can cause a poor electrical connection or an open/short circuit in the Fuel Indirect Injector system, which is a common cause of the fault code. By addressing these potential problems, you can effectively fix the issue and clear the Engine Light or Service Engine Soon Warning Light.

p10cd error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Fuel Indirect Injector.

To fix this issue, visually inspect the wiring harness and connectors for any damage.

Also, check for broken, bent, pushed out, or corroded connector pins.

Take action now to prevent further problems.

Scroll to Top