[SOLVED] P0B10 Code: Fixing Low Voltage In Hybrid/Ev Battery High Resolution Current Sensor Circuit

The automobile fault code P0B10 indicates a problem with the Battery Energy Control Module. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light. This fault code can be caused by a faulty Battery Energy Control Module, an open or shorted harness, or poor electrical connections in the module circuit.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage.

Look for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0 hour. It is important to address this problem promptly to prevent further damage to the vehicle’s electrical system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0b10 fault code.

  • The symptoms of the automobile fault code p0b10 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0b10 can be caused by a faulty Battery Energy Control Module, an open or shorted harness, or a poor electrical connection in the circuit.

  • The fault code p0b10 can be caused by the following: a faulty Battery Energy Control Module, an open or shorted harness for the Battery Energy Control Module, and a poor electrical connection in the Battery Energy Control Module circuit.

To fix the automobile fault code p0b10, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0b10, first, check the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0b10 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0b10 fault code.

The P0B10 fault code refers to the HybridEV Battery High Resolution Current Sensor Circuit having a low voltage. This fault code is related to the sensor that detects the amperage flowing in and out of the hybridEV battery pack. The sensor returns a signal between 0 and 5 volts to the battery energy control module, indicating whether the battery is being charged or discharged.

A signal voltage below 2.5 volts suggests that the battery is discharging, while a voltage above 2.5 volts indicates that the battery is being charged. The hybridEV battery pack current sensor has two measurement ranges, low resolution and high resolution, to ensure accuracy. The high resolution range measures from -23 to +23 amps, while the low resolution range measures from -470 to +280 amps.

If the sensor circuit has a low voltage, it can affect the accuracy of the current measurement.

What are the possible causes for the automobile fault code p0b10?

If you see the engine light or service engine soon warning light on, the fault code P0B10 could be the culprit. This code is often caused by a faulty Battery Energy Control Module or issues with the module’s harness, such as an open or short circuit or poor electrical connection. To fix the problem, start by visually inspecting the wiring harness and connectors. Look for any signs of damage or corrosion, and check for broken, bent, pushed out, or corroded pins on the connectors.

How can I visually inspect the wiring harness and connectors to fix the fault code p0b10?

If you’re dealing with the fault code p0b10 and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This could be caused by a faulty Battery Energy Control Module or an open or shorted harness. To fix it, check for damaged components and look for any broken, bent, pushed out, or corroded pins in the connectors. Don’t forget to also check the other possible causes listed above.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0b10?

If you’re dealing with the fault code p0b10 and your engine light is on, it’s important to check for damaged components and connector’s pins. This code is often caused by a faulty Battery Energy Control Module or issues with the module’s harness and circuit connection. To resolve the issue, visually inspect the wiring harness and connectors, paying close attention to any signs of damage. Look out for broken, bent, pushed out, or corroded pins on the connectors. Taking these steps can help you identify and address the problem effectively.

p0b10 error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Battery Energy Control Module or issues with the module’s harness or electrical connection. To fix this, visually inspect the wiring harness and connectors, checking for any damage or corrosion.

Look out for broken or bent pins on the connectors.

Scroll to Top