[SOLVED] P0A6D Code: Drive Motor ‘b’ Phase W Current Low – How To Fix It!

The automobile fault code P0A6D indicates a problem with the Inverter With Converter Assembly.

The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.

This fault code can be caused by a faulty Inverter With Converter Assembly, an open or shorted harness, or a poor electrical connection in the circuit. To fix this issue, you should visually inspect the wiring harness and connectors for any damage.

Look for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this fault code is estimated to be around 1.0. It is important to address this issue promptly to prevent further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0a6d fault code.

  • The symptoms of the automobile fault code p0a6d include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0a6d can be caused by a faulty inverter with converter assembly, an open or shorted harness, or a poor electrical connection in the circuit.

  • The fault code p0a6d can be caused by: a faulty Inverter With Converter Assembly, an open or shorted Inverter With Converter Assembly harness, and a poor electrical connection in the Inverter With Converter Assembly circuit.

To fix the p0a6d fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0a6d, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The automobile fault code P0A6D can be diagnosed and fixed within an estimated repair time of 1.0 hour. Most auto repair shops typically charge between $75 and $150 per hour for this type of repair.

The P0A6D fault code refers to a specific issue with the drive motor ‘B’ phase W current being too low. The inverter in the vehicle is responsible for converting the high-voltage direct current from the HV battery into alternating current for the MG1MG2 motors.

The inverter contains power transistors for both MG1 and MG2, which convert the direct current and three-phase alternating current. The HV control ECU controls the actuation of these power transistors.

The inverter also transmits important information, such as amperage and voltage, to the HV control ECU for effective control. The motor inverter current sensors detect the amperage flowing through the cables between the inverter and MG1MG2. The HV control ECU monitors these current sensors to identify any malfunction in the sensor system.

If the P0A6D fault code is triggered, it indicates that the drive motor ‘B’ phase W current is lower than expected.

This fault code helps diagnose and address issues related to the inverter and motor system in the vehicle.

What are the possible causes for the automobile fault code P0A6D?

If you see the engine light or service engine soon warning light on, the fault code P0A6D could be the culprit. This code is often caused by a faulty inverter with converter assembly, an open or shorted harness, or a poor electrical connection in the inverter with converter assembly circuit. To fix the issue, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look out for broken, bent, pushed out, or corroded pins in the connectors.

How can I visually inspect the wiring harness and connectors related to the Inverter With Converter Assembly?

To visually inspect the wiring harness and connectors related to the Inverter With Converter Assembly, start by checking the “Possible Causes” mentioned above. Then, carefully examine the wiring harness and connectors for any signs of damage. Look out for broken, bent, pushed out, or corroded pins on the connectors. This thorough inspection will help identify any issues and allow for timely repairs.

What should I look for when checking the connector’s pins for the P0A6D fault code?

When checking the connector’s pins for the P0A6D fault code, there are a few things to look for. Start by visually inspecting the related wiring harness and connectors. Check for any damaged components and look closely at the connector’s pins. Look for any signs of them being broken, bent, pushed out, or corroded. These issues can cause a poor electrical connection and contribute to the fault code. By thoroughly examining the pins, you can identify any potential problems and take the necessary steps to fix them.

p0a6d error fault code explained

If your engine light is on, it could be due to a faulty Inverter With Converter Assembly or issues with the wiring harness and connectors. To fix it, visually inspect the wiring and connectors for any damage. Also, check for broken, bent, pushed out, or corroded pins on the connectors.

Scroll to Top