[SOLVED] P0A62 Code – Drive Motor ‘a’ Phase V Current High: Causes And Fixes

The automobile fault code P0A62 indicates a problem with the Inverter With Converter Assembly. The most common symptom is the Engine Light being ON or the Service Engine Soon Warning Light.

This fault code can be caused by a faulty Inverter With Converter Assembly, an open or shorted harness, or a poor electrical connection in the circuit. To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this fault code is estimated to be around 1.0.

It is important to address this issue promptly to prevent further damage to the vehicle’s electrical system.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0a62 fault code.

  • The symptoms of the automobile fault code p0a62 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0a62 can be caused by a faulty inverter with converter assembly, an open or shorted harness, or a poor electrical connection in the circuit.

  • The fault code p0a62 can be caused by a faulty Inverter With Converter Assembly, an open or shorted Inverter With Converter Assembly harness, or a poor electrical connection in the Inverter With Converter Assembly circuit.

To fix the automobile fault code p0a62, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0a62, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0a62 include the estimated repair time of 1.0 hour and the typical hourly rate charged by auto repair shops, which ranges between $75 and $150.

The P0A62 fault code refers to a high current in the ‘A’ phase of the drive motor. The inverter in the vehicle converts the high-voltage direct current from the HV battery into alternating current for the MG1MG2 motors. The inverter contains power transistors that convert the direct current and three-phase alternating current.

The HV control ECU controls the actuation of these power transistors.

The motor inverter current sensors detect the amperage flowing through the cables between the inverter and MG1MG2.

The HV control ECU monitors these sensors for any malfunctions in the sensor system. If the ‘A’ phase current is too high, it triggers the P0A62 fault code.

What are the possible causes for the automobile fault code p0a62?

If you see the engine light or service engine soon warning light on, the fault code P0A62 could be the culprit. This code is often caused by a faulty inverter with converter assembly, an open or shorted harness, or a poor electrical connection in the inverter with converter assembly circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any signs of damage or corrosion, and check for broken, bent, pushed out, or corroded pins in the connectors.

How can I visually inspect the wiring harness and connectors to fix the fault code p0a62?

If you’re dealing with the fault code p0a62 and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This code is often caused by a faulty Inverter With Converter Assembly or issues with the harness and circuit connections. To fix it, check for any damaged components and examine the wiring harness and connectors for any signs of damage like broken, bent, pushed out, or corroded pins. Don’t forget to also consider the other possible causes listed above.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0a62?

When troubleshooting the fault code p0a62, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken, bent, pushed out, or corroded connector pins. These issues can cause a poor electrical connection or an open or shorted circuit in the Inverter With Converter Assembly. By checking for damaged components and examining the connector’s pins, you can identify and resolve the cause of the fault code.

p0a62 error fault code explained

To fix the p0a62 fault code, start by visually inspecting the wiring harness and connectors related to the Inverter With Converter Assembly. Look for any damage or corrosion. Check for broken, bent, or pushed out pins on the connectors.

Address any issues found to resolve the problem.

Scroll to Top