[SOLVED] P0A55 Code: Fixing Drive Motor ‘b’ Current Sensor Circuit Issue

The automobile fault code P0A55 indicates a problem with the Drive Motor B Current Sensor. This can be identified by the Engine Light being ON or the Service Engine Soon Warning Light.

The cause of this fault code could be a faulty Drive Motor B Current Sensor, an open or shorted harness, or a poor electrical connection in the sensor circuit. To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this fault code is estimated to be 1.0. It is important to address this issue promptly to prevent further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0a55 fault code.

  • The symptoms of the automobile fault code p0a55 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0a55 can be caused by a faulty Drive Motor B Current Sensor, an open or shorted harness, or a poor electrical connection in the circuit.

  • The fault code p0a55 can be caused by: – Faulty Drive Motor B Current Sensor – Open or shorted harness of Drive Motor B Current Sensor – Poor electrical connection in the Drive Motor B Current Sensor circuit.

To fix the p0a55 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0a55, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0a55 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0a55 fault code.

The P0A55 fault code refers to the Drive Motor ‘B’ Current Sensor Circuit. This code is set by the Engine Control Module (ECM) when the Drive Motor ‘B’ Current Sensor does not meet the factory specifications.

The ECM monitors this sensor to ensure proper functioning of the drive motor.

When the sensor readings are outside the expected range, the P0A55 code is triggered. It is important to address this issue promptly to ensure the drive motor operates correctly and efficiently.

What are the possible causes for the automobile fault code p0a55?

If you see the engine light or service engine soon warning light on, it could be due to the fault code P0A55. This code is often caused by a faulty drive motor B current sensor, an open or shorted harness for the drive motor B current sensor, or a poor electrical connection in the drive motor B current sensor circuit. To fix this issue, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look out for broken, bent, pushed out, or corroded pins in the connectors.

How can I visually inspect the wiring harness and connectors to fix the p0a55 fault code?

If you’re dealing with the p0a55 fault code and your engine light is on, it’s time to take action. The most common cause of this issue is a faulty Drive Motor B Current Sensor or problems with the sensor’s wiring harness and connectors. To fix it, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are pushed out. This simple step can help you identify and resolve the issue.

What should I look for when checking for damaged components or corroded connector pins to resolve the p0a55 fault code?

When resolving the p0a55 fault code, start by checking for damaged components or corroded connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any broken, bent, pushed out, or corroded pins on the connectors. By doing this, you can identify any issues with the Drive Motor B Current Sensor or its circuit connections. Don’t forget to also check for any open or shorted harnesses. Taking these steps will help you pinpoint and resolve the cause of the fault code.

p0a55 error fault code explained

If your engine light is on and you’re seeing the P0A55 fault code, it could be due to a faulty Drive Motor B Current Sensor or issues with the sensor’s wiring harness.

To fix it, visually inspect the wiring harness and connectors for any damage or poor connections.

Look out for broken, bent, pushed out, or corroded pins on the connectors.

Scroll to Top