[SOLVED] P0A52 Code: Drive Motor ‘a’ Current Sensor – Fix And Prevent!

The automobile fault code P0A52 indicates a problem with the Drive Motor A Current Sensor. This can cause the Engine Light to turn on or the Service Engine Soon Warning Light to illuminate. The possible causes include a faulty sensor, an open or shorted harness, or a poor electrical connection in the sensor circuit.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this problem is estimated to be around 1.0 hour.

It is important to address this issue promptly to prevent further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0a52 fault code.

  • The symptoms of the automobile fault code p0a52 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0a52 can be caused by a faulty Drive Motor A Current Sensor, an open or shorted harness, or a poor electrical connection in the circuit.

  • The fault code p0a52 can be caused by: – Faulty Drive Motor A Current Sensor – Open or shorted harness of Drive Motor A Current Sensor – Poor electrical connection in the Drive Motor A Current Sensor circuit.

To fix the automobile fault code p0a52, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0a52, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0a52 are the estimated repair time and the hourly rate charged by auto repair shops.

The estimated repair time for this fault code is 1.0 hour.

Auto repair shops typically charge between $75 and $150 per hour for their services. These factors will determine the overall cost of diagnosing and fixing the p0a52 fault code.

The P0A52 fault code refers to the Drive Motor ‘A’ Current Sensor Circuit RangePerformance. This code is set by the Engine Control Module (ECM) when the Drive Motor ‘A’ Current Sensor does not meet the factory specifications. The ECM monitors this sensor to ensure it is functioning correctly.

When it detects that the sensor is not operating within the expected range, it triggers the P0A52 fault code. This code indicates that there may be an issue with the current sensor circuit in the drive motor ‘A’ system.

It is important to address this fault code promptly to ensure optimal performance and efficiency of the vehicle.

What are the possible causes for the automobile fault code p0a52?

If you see the engine light or service engine soon warning light on, the fault code P0A52 could be the culprit. This code is often caused by a faulty drive motor A current sensor or issues with the sensor’s wiring harness. To fix the problem, visually inspect the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded pins on the connectors. Don’t forget to also check for any damaged components.

How can I visually inspect the wiring harness and connectors to fix the issue?

To fix the issue of the Engine Light being ON or the Service Engine Soon Warning Light, start by checking the possible causes. Then, visually inspect the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This thorough inspection will help identify any issues with the Drive Motor A Current Sensor and its related circuit.

What should I look for specifically when checking for damaged components or corroded connector pins?

When you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Drive Motor A Current Sensor or issues with the sensor’s wiring. To check for damaged components or corroded connector pins, visually inspect the related wiring harness and connectors. Look for any broken, bent, pushed out, or corroded pins on the connectors. This will help you identify and fix the problem effectively.

p0a52 error fault code explained

To fix the p0a52 fault code, start by visually inspecting the wiring harness and connectors.

Look for any damage or corrosion. Check the Drive Motor A Current Sensor and its circuit for any open or shorted connections.

Make sure the connector pins are not broken, bent, pushed out, or corroded.

Scroll to Top