[SOLVED] P0A51 Code: Fixing Drive Motor ‘a’ Current Sensor Circuit Issue

The automobile fault code P0A51 indicates a problem with the Drive Motor A Current Sensor. This can be identified by the Engine Light being ON or the Service Engine Soon Warning Light. The cause of this fault code could be a faulty Drive Motor A Current Sensor, an open or shorted harness, or a poor electrical connection in the Drive Motor A Current Sensor circuit.

To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage.

Look out for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this fault code is estimated to be 1.0.

It is important to address this issue promptly to prevent further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0a51 fault code.

  • The symptoms of the automobile fault code p0a51 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0a51 can be caused by a faulty Drive Motor A Current Sensor, an open or shorted harness, or a poor electrical connection in the circuit.

  • The fault code p0a51 can be caused by: – Faulty Drive Motor A Current Sensor – Open or shorted harness of Drive Motor A Current Sensor – Poor electrical connection in the Drive Motor A Current Sensor circuit.

To fix the p0a51 fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0a51, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded pins on the connectors.
  • This fix typically takes around 1.0 hour to complete.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0a51 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0a51 fault code.

The P0A51 fault code refers to the Drive Motor ‘A’ Current Sensor Circuit.

This code is set by the Engine Control Module (ECM) when the Drive Motor ‘A’ Current Sensor does not meet the factory specifications. The ECM monitors this sensor to ensure it is functioning correctly. When it detects an issue with the sensor, it triggers the P0A51 fault code.

This code indicates a problem with the circuit that measures the current in Drive Motor ‘A’. It is important to address this issue promptly to ensure the proper functioning of the vehicle.

What are the possible causes for the automobile fault code P0A51?

If you see the engine light or service engine soon warning light on, the fault code P0A51 could be the culprit. This code is often caused by a faulty drive motor A current sensor or issues with the sensor’s wiring harness. To fix the problem, visually inspect the wiring harness and connectors for any damage. Check for broken, bent, pushed out, or corroded pins on the connectors. Don’t forget to also consider the possibility of damaged components.

How can I visually inspect the wiring harness and connectors to fix the issue?

To fix the issue of the Engine Light being ON or the Service Engine Soon Warning Light, start by checking the possible causes. Then, visually inspect the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This thorough inspection will help identify any issues with the Drive Motor A Current Sensor and its circuit.

What should I look for specifically when checking for damaged components or corroded connector pins?

When you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Drive Motor A Current Sensor or issues with the sensor’s wiring. To check for damaged components or corroded connector pins, visually inspect the related wiring harness and connectors. Look for any broken, bent, pushed out, or corroded pins on the connectors. This will help identify and fix the problem.

p0a51 error fault code explained

If your engine light is on and you’re seeing the P0A51 fault code, it could be due to a faulty Drive Motor A Current Sensor or issues with the sensor’s wiring harness.

To fix it, visually inspect the wiring harness and connectors for any damage or corrosion.

Look out for broken or bent pins as well.

Scroll to Top