[SOLVED] P0A36 Code: Fix Generator Temperature Sensor Circuit For Optimal Performance

The automobile fault code P0A36 indicates a problem with the Hybrid Vehicle Motor. When this fault code appears, the Engine Light or Service Engine Soon Warning Light will turn on. The possible causes for this issue include a faulty Hybrid Vehicle Motor, an open or shorted Hybrid Vehicle Motor harness, or a poor electrical connection in the Hybrid Vehicle Motor circuit.

To fix this problem, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0 hour.

It is important to address this fault code promptly to ensure the proper functioning of your vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be a sign of the p0a36 fault code.

  • The symptoms of the automobile fault code p0a36 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0a36 can be caused by a faulty hybrid vehicle motor, an open or shorted motor harness, or a poor electrical connection in the motor circuit.

  • The fault code p0a36 can be caused by a faulty Hybrid Vehicle Motor, an open or shorted Hybrid Vehicle Motor harness, or a poor electrical connection in the Hybrid Vehicle Motor circuit.

To fix the automobile fault code p0a36, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0a36, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0a36 are the estimated repair time of 1.0 hour and the typical hourly rate charged by auto repair shops, which ranges from $75 to $150.

The P0A36 fault code refers to the Generator Temperature Sensor Circuit. This code is triggered when the motor temperature sensor No. 2 detects an issue with the temperature of the transaxle fluid.

The resistance of the thermistor in the sensor changes with the fluid temperature.

The HV control ECU uses the signal from this sensor to limit the load on the motor and prevent overheating. The HV control ECU also checks for any wiring or sensor malfunctions related to the motor temperature sensor No. 2.

If this fault code appears, it indicates a problem with the generator temperature sensor circuit that needs to be addressed.

What are the possible causes for the automobile fault code p0a36?

If you see the engine light or service engine soon warning light on, the fault code P0A36 could be the culprit. This code is often caused by a faulty hybrid vehicle motor, an open or shorted motor harness, or a poor electrical connection in the motor circuit. To fix the issue, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. It’s important to address these possible causes to resolve the fault code.

How can I visually inspect the wiring harness and connectors to fix the p0a36 fault code?

If you’re dealing with the p0a36 fault code and your engine light is on, it’s time to take action. The cause could be a faulty hybrid vehicle motor or issues with the wiring harness and connectors. To fix it, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. This simple step can help you identify and resolve the issue. Don’t delay, get to the bottom of the problem and get your engine running smoothly again.

What should I look for when checking for damaged components and connector’s pins to resolve the p0a36 fault code?

If you’re dealing with the p0a36 fault code and your engine light is on, it’s time to roll up your sleeves and get to work. The culprit could be a faulty Hybrid Vehicle Motor or an open or shorted harness. To fix it, start by visually inspecting the wiring harness and connectors. Look out for any damaged components and check for broken, bent, pushed out, or corroded connector’s pins. Don’t skip this step, as it could be the key to resolving the issue.

p0a36 error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Hybrid Vehicle Motor or issues with the motor harness.

To fix this, visually inspect the wiring harness and connectors for any damage or poor electrical connections.

Look out for broken, bent, pushed out, or corroded connector pins.

Scroll to Top