[SOLVED] P0A2E Code: Fix Intermittent Drive Motor ‘a’ Temperature Sensor Circuit

The automobile fault code P0A2E indicates a problem with the Hybrid Vehicle Motor.

When this fault code appears, the Engine Light or Service Engine Soon Warning Light will turn on.

The possible causes for this issue include a faulty Hybrid Vehicle Motor, an open or shorted Hybrid Vehicle Motor harness, or a poor electrical connection in the Hybrid Vehicle Motor circuit. To fix this problem, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion.

Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0 hour.

It is important to address this fault code promptly to ensure the proper functioning of your vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0a2e fault code.

  • The symptoms of the automobile fault code p0a2e include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0a2e can be caused by a faulty hybrid vehicle motor, an open or shorted motor harness, or a poor electrical connection in the motor circuit.

  • The fault code p0a2e can be caused by a faulty Hybrid Vehicle Motor, an open or shorted Hybrid Vehicle Motor harness, or a poor electrical connection in the Hybrid Vehicle Motor circuit.

To fix the p0a2e fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0a2e, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix typically takes around 1.0 hour to complete.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0a2e are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0a2e fault code.

The P0A2E fault code refers to the Drive Motor ‘A’ Temperature Sensor Circuit Intermittent issue.

This code indicates a problem with the circuit that monitors the temperature of the drive motor ‘A’. Inside the motor temperature sensor, there is a thermistor that measures the resistance based on the temperature of the MG2 (motor generator 2).

As the temperature of MG2 changes, the resistance of the thermistor also changes. When the MG2 temperature is low, the resistance of the thermistor is high. On the other hand, when the temperature is high, the resistance is low.

The P0A2E fault code suggests that there is an intermittent issue with the circuit that monitors the temperature of the drive motor ‘A’. This could be caused by a faulty sensor, a loose connection, or a wiring problem. It is important to address this issue promptly to ensure the proper functioning of the drive motor and prevent further damage.

What are the possible causes for the automobile fault code p0a2e?

If you see the engine light or service engine soon warning light on, the fault code P0A2E could be the culprit. This code is often caused by a faulty hybrid vehicle motor, an open or shorted motor harness, or a poor electrical connection in the motor circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any signs of damage or corrosion, and check if any components are broken or bent. Pay close attention to the connector’s pins, as they may be pushed out or corroded.

How can I visually inspect the wiring harness and connectors to fix the fault code p0a2e?

If you’re dealing with the fault code p0a2e and your engine light is on, it’s time to take a closer look at the wiring harness and connectors. The cause could be a faulty hybrid vehicle motor, an open or shorted harness, or a poor electrical connection. To fix it, visually inspect the wiring harness and connectors for any signs of damage. Check for broken, bent, pushed out, or corroded pins on the connectors. Don’t forget to refer to the “Possible Causes” listed above for further troubleshooting.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0a2e?

When resolving the fault code p0a2e, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. These issues can cause a poor electrical connection or an open/short circuit in the Hybrid Vehicle Motor, leading to the Engine Light being ON. By addressing these potential causes, you can effectively fix the fault code.

p0a2e error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Hybrid Vehicle Motor or issues with the motor harness. To fix this, visually inspect the wiring harness and connectors for any damage or corrosion.

Check for broken or bent pins as well.

Scroll to Top