[SOLVED] P0A2D Code – Drive Motor ‘a’ Temperature Sensor Circuit High: Diagnosis And Fix

The automobile fault code P0A2D indicates a problem with the Hybrid Vehicle Motor. When this fault code appears, the Engine Light or Service Engine Soon Warning Light will turn on. The possible causes for this issue include a faulty Hybrid Vehicle Motor, an open or shorted Hybrid Vehicle Motor harness, or a poor electrical connection in the Hybrid Vehicle Motor circuit.

To fix this problem, you should visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look for any broken, bent, pushed out, or corroded pins in the connectors. The repair time for this issue is estimated to be around 1.0 hour.

It is important to address this fault code promptly to ensure the proper functioning of your vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0a2d fault code.

  • The symptoms of the automobile fault code p0a2d include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0a2d can be caused by a faulty hybrid vehicle motor, an open or shorted motor harness, or a poor electrical connection in the motor circuit.

  • The fault code p0a2d can be caused by a faulty Hybrid Vehicle Motor, an open or shorted Hybrid Vehicle Motor harness, or a poor electrical connection in the Hybrid Vehicle Motor circuit.

To fix the automobile fault code p0a2d, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0a2d, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0a2d are the estimated repair time of 1.0 hour and the typical hourly rate charged by auto repair shops, which ranges from $75 to $150.

The P0A2D fault code refers to the Drive Motor ‘A’ Temperature Sensor Circuit High. This code indicates that there is a problem with the temperature sensor in the drive motor. The temperature sensor, also known as the thermistor, measures the temperature of the motor and sends a signal to the HV control ECU.

The resistance of the thermistor changes with the motor temperature.

When the motor is cooler, the resistance is higher, and when it is hotter, the resistance is lower.

The motor temperature sensor is connected to the HV control ECU, which receives a 5V power voltage from the MMT terminal. The HV control ECU uses the signal from the temperature sensor to limit the load on the motor and prevent overheating.

It also checks for any wiring malfunctions or issues with the sensor itself. If the circuit is reading a high temperature, it means there may be a problem with the sensor or its wiring. This fault code helps identify and diagnose the issue with the drive motor temperature sensor.

What are the possible causes for the automobile fault code p0a2d?

If you see the engine light or service engine soon warning light on, the fault code P0A2D could be the culprit. This code is often caused by a faulty hybrid vehicle motor, an open or shorted motor harness, or a poor electrical connection in the motor circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any signs of damage or corrosion, and check if any components are broken, bent, or pushed out. It’s important to ensure that the connector’s pins are not corroded as well.

How can I visually inspect the wiring harness and connectors to fix the fault code p0a2d?

If you’re dealing with the fault code p0a2d and your engine light is on, it’s time to visually inspect the wiring harness and connectors. This code could be caused by a faulty hybrid vehicle motor, an open or shorted harness, or a poor electrical connection in the motor circuit. To fix it, check the possible causes mentioned earlier and give the wiring harness and connectors a thorough visual inspection. Look out for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors.

What should I look for when checking for damaged components or corroded connector pins to resolve the fault code p0a2d?

When resolving the fault code p0a2d, start by checking for damaged components or corroded connector pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any broken, bent, pushed out, or corroded pins. These issues can cause a poor electrical connection or an open/short circuit in the Hybrid Vehicle Motor. By addressing these potential causes, you can fix the problem and turn off the Engine Light or Service Engine Soon Warning Light.

p0a2d error fault code explained

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to a faulty Hybrid Vehicle Motor or issues with the motor harness. To fix this, visually inspect the wiring harness and connectors for any damage or corrosion.

Check for broken or bent pins as well.

Scroll to Top