[SOLVED] P0A2A Code: Drive Motor ‘a’ Temperature Sensor Circuit – Diagnosis And Fix

The automobile fault code P0A2A indicates a problem with the Drive Motor ‘A’ Temperature Sensor. This can be identified by the Engine Light being ON or the Service Engine Soon Warning Light.

The cause of this fault code could be a faulty sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit. To fix this issue, it is recommended to visually inspect the wiring harness and connectors for any damage.

Look out for broken, bent, pushed out, or corroded pins in the connectors. The repair time for this problem is estimated to be around 1.0 hour.

It is important to address this issue promptly to prevent further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be a sign of the p0a2a fault code.

  • The symptoms of the automobile fault code p0a2a include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0a2a can be caused by a faulty drive motor temperature sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit.

  • The fault code P0A2A can be caused by the following: – Faulty Drive Motor ‘A’ Temperature Sensor.
  • – Drive Motor ‘A’ Temperature Sensor harness is open or shorted.
  • – Drive Motor ‘A’ Temperature Sensor circuit has a poor electrical connection.

To fix the p0a2a fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0a2a, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the cost of diagnosing and fixing the automobile fault code p0a2a based on the estimated repair time of 1.0 hour include the hourly rate charged by auto repair shops, which typically ranges between $75 and $150.

The P0A2A fault code refers to the Drive Motor ‘A’ Temperature Sensor Circuit. This code is set by the Engine Control Module (ECM) when the Hybrid Battery is not functioning within the factory specifications.

The ECM constantly monitors the Hybrid Battery to ensure its proper operation.

If the temperature sensor circuit for Drive Motor ‘A’ is not functioning correctly, it can trigger this fault code. It is important to address this issue promptly to ensure the optimal performance and efficiency of the hybrid vehicle.

What are the possible causes for the automobile fault code p0a2a?

If you see the engine light on or the service engine soon warning light, the fault code P0A2A could be the culprit. This code is often caused by a faulty drive motor ‘A’ temperature sensor, an open or shorted sensor harness, or a poor electrical connection in the sensor circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look for any signs of damage or corrosion. Additionally, check for broken, bent, pushed out, or corroded pins in the connectors.

How can I visually inspect the wiring harness and connectors to fix the fault code p0a2a?

If you’re dealing with the fault code p0a2a and your engine light is on, it’s time to take a closer look at the wiring harness and connectors. The most likely cause of this issue is a faulty Drive Motor ‘A’ Temperature Sensor or a problem with the sensor’s circuit. To fix it, visually inspect the wiring harness and connectors for any signs of damage. Check for broken, bent, pushed out, or corroded pins on the connectors. This simple step can help you identify and resolve the issue.

What should I look for when checking for damaged components and connector’s pins to resolve the fault code p0a2a?

When resolving the fault code p0a2a, start by checking for damaged components and connector’s pins. This can be done by visually inspecting the related wiring harness and connectors. Look for any signs of damage such as broken, bent, pushed out, or corroded pins. By doing this, you can identify any issues with the Drive Motor ‘A’ Temperature Sensor or its circuit. This step is crucial in fixing the problem and getting rid of the Engine Light or Service Engine Soon Warning Light.

p0a2a error fault code explained

If your engine light is on and you’re seeing the P0A2A fault code, it could be due to a faulty Drive Motor ‘A’ Temperature Sensor or issues with the sensor’s wiring. To fix this, visually inspect the wiring harness and connectors, checking for any damage or corrosion. Look out for broken or bent pins as well.

Scroll to Top