[SOLVED] P0A1C Code: Drive Motor ‘b’ Control Module – Diagnosis And Fix

The automobile fault code P0A1C indicates a problem with the inverter and converter assembly.

The symptoms may vary, but you might experience issues with the hybrid system or a decrease in fuel efficiency.

The most common causes are a faulty inverter with converter assembly, an open or shorted harness, or poor electrical connections.

To fix this issue, visually inspect the wiring harness and connectors for any damage.

Look out for broken, bent, pushed out, or corroded pins on the connectors.

The repair time for this fault code is estimated to be around 1.0 hour.

It is important to address this problem promptly to ensure optimal performance and avoid further complications.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

Experiencing a lack of power, reduced fuel efficiency, and a malfunctioning hybrid system are common symptoms of fault code p0a1c.

  • The symptoms of the automobile fault code P0A1C include: – Malfunction indicator lamp (MIL) illuminated – Hybrid system warning light illuminated – Reduced engine power – Vehicle may not start – Poor fuel efficiency – Engine may stall or hesitate – Loss of power steering – Battery not charging properly – Regenerative braking system not functioning correctly – Vehicle may go into “limp mode”

The automobile fault code p0a1c can be caused by a faulty inverter with converter assembly, an open or shorted harness, or a poor electrical connection in the circuit.

  • The fault code P0A1C can be caused by the following: – Faulty inverter with converter assembly.
  • – Inverter with converter assembly harness is open or shorted.
  • – Inverter with converter assembly circuit has a poor electrical connection.

To fix the p0a1c fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0a1c, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix typically takes around 1.0 hour to complete.

The automobile fault code P0A1C diagnosis and fixing cost is influenced by the estimated repair time, which is 1.0 hour. Auto repair shops typically charge between $75 and $150 per hour for their services.

When you see the Engine Light ON or the Service Engine Soon Warning Light, it could be due to the fault code P0A1C.

This code specifically relates to a problem with the hybrid battery pack coolant pump control circuit. It indicates that there is an issue with the control circuit that manages the coolant pump for the hybrid battery pack.

The hybrid battery pack coolant pump is responsible for maintaining the optimal temperature of the battery pack. If the control circuit malfunctions, it can lead to inadequate cooling, which can affect the performance and lifespan of the battery pack. To fix this issue, you will need to diagnose the control circuit and determine the exact cause of the problem.

It could be a faulty pump, a wiring issue, or a problem with the control module. Once the cause is identified, the necessary repairs or replacements can be made to ensure proper functioning of the hybrid battery pack coolant pump control circuit.

It is important to address this issue promptly to prevent further damage and ensure the efficient operation of your hybrid vehicle.

What are the possible causes of fault code P0A1C in an automobile?

The fault code P0A1C in an automobile can be caused by a faulty inverter with converter assembly, an open or shorted inverter with converter assembly harness, or a poor electrical connection in the inverter with converter assembly circuit. To fix this issue, visually inspect the wiring harness and connectors, checking for any damage or broken, bent, pushed out, or corroded pins in the connectors. Additionally, refer to the possible causes listed above for further troubleshooting.

How can I visually inspect the wiring harness and connectors to fix fault code P0A1C?

To fix fault code P0A1C, start by visually inspecting the wiring harness and connectors. Look for any damaged components and check if there are any broken, bent, pushed out, or corroded pins in the connectors. This can help identify if the fault is due to a faulty inverter with converter assembly, an open or shorted harness, or a poor electrical connection. Make sure to check the possible causes mentioned above to narrow down the issue.

What should I look for when checking for damaged components or corroded connector pins to resolve fault code P0A1C?

To resolve fault code P0A1C, start by visually inspecting the wiring harness and connectors. Look for any signs of damage or corrosion. Pay close attention to the inverter with converter assembly and check for any faults or poor electrical connections. Specifically, check for broken, bent, pushed out, or corroded connector pins. By thoroughly examining these components and addressing any issues found, you can effectively resolve the fault code.

p0a1c error fault code explained

If you’re experiencing issues with your vehicle and the fault code P0A1C appears, it could be due to a faulty inverter with converter assembly or problems with the wiring harness and electrical connections. To fix this, visually inspect the wiring harness and connectors for any damage or corrosion.

Check for broken or bent pins as well.

Scroll to Top