[SOLVED] P0994 Code: Lr Pressure Switch Sense Circuit – Diagnosis And Fix

The automobile fault code P0994 indicates a problem with the LR Pressure Switch in the transmission. Symptoms may include erratic shifting, transmission slipping, or the transmission not engaging properly.

The cause of this fault code can be a LR Pressure Switch harness that is open or shorted, a poor electrical connection in the LR Pressure Switch circuit, a faulty LR Pressure Switch, internal transmission damage, or a faulty Powertrain Control Module (PCM) or Transmission Control Module (TCM).

To fix this issue, start by visually inspecting the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins in the connectors.

If any damaged components are found, they should be replaced. The importance of repairing this fault code lies in ensuring the proper functioning of the transmission, which is crucial for the overall performance and safety of the vehicle.

The difficulty of the repair may vary depending on the specific cause, but it is generally considered a moderate-level repair that can be done by a skilled technician.

It is recommended to address this issue promptly to avoid further damage to the transmission.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

Experiencing shifting issues, slipping gears, and a malfunctioning transmission?

Check out the symptoms of fault code p0994 below.

  • The symptoms of the automobile fault code P0994 may include: – Transmission fluid leakage – Difficulty shifting gears – Slipping or jerking during acceleration – Delayed engagement when shifting into drive or reverse – Illuminated check engine light – Reduced fuel efficiency – Overheating of the transmission

The automobile fault code P0994 can be caused by various factors, including issues with the LR Pressure Switch, internal transmission damage, and faulty control modules.

  • The fault code P0994 can be caused by the following: an open or shorted LR Pressure Switch harness, a poor electrical connection in the LR Pressure Switch circuit, a faulty LR Pressure Switch, internal transmission damage, a faulty Powertrain Control Module (PCM), or a faulty Transmission Control Module (TCM).

To fix the automobile fault code p0994, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0994, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code p0994 are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour.

Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p0994 fault code.

When you see the Engine Light ON or the Service Engine Soon Warning Light, it’s a sign that something is not right with your vehicle. One possible culprit could be the fault code P0994.

This code indicates a problem with the transmission, specifically that it will not shift gears properly. This can be a frustrating issue as it can lead to a lack of power and control while driving. It’s important to address this problem promptly to avoid further damage to your transmission and ensure a smooth and safe driving experience.

What are the possible causes of the automobile fault code P0994?

The fault code P0994 in an automobile can be caused by various factors. These include an open or shorted LR Pressure Switch harness, a poor electrical connection in the LR Pressure Switch circuit, a faulty LR Pressure Switch, internal transmission damage, a faulty Powertrain Control Module (PCM), or a faulty Transmission Control Module (TCM). To fix this issue, it is recommended to visually inspect the wiring harness and connectors, checking for any damage or corrosion. Additionally, look out for broken, bent, pushed out, or corroded connector pins.

How can I visually inspect the wiring harness and connectors to fix the P0994 fault code?

To fix the P0994 fault code, start by visually inspecting the wiring harness and connectors. Look for any signs of damage or corrosion. Check the LR Pressure Switch harness for any open or shorted circuits. Also, ensure there is a good electrical connection in the LR Pressure Switch circuit. If necessary, replace the LR Pressure Switch or address any internal transmission damage. Finally, consider checking the Powertrain Control Module (PCM) and Transmission Control Module (TCM) for any faults.

What should I look for when checking for damaged components and connector pins to resolve the P0994 fault code?

To resolve the P0994 fault code, start by visually inspecting the wiring harness and connectors. Look for any signs of damage and check for broken, bent, pushed out, or corroded connector pins. This could indicate a problem with the LR Pressure Switch harness or circuit. Additionally, check the other possible causes listed, such as internal transmission damage or faulty control modules. Taking these steps will help identify and address the issue effectively.

p0994 error fault code explained

To fix the P0994 fault code, start by visually inspecting the LR Pressure Switch harness and connectors for any damage.

Look out for broken, bent, pushed out, or corroded pins. If necessary, check the electrical connection and replace the LR Pressure Switch if faulty. Additionally, assess the Powertrain Control Module (PCM) and Transmission Control Module (TCM) for any issues.

Scroll to Top