[SOLVED] P0982 Code: Fixing Low Shift Solenoid ‘d’ Control Circuit

The automobile fault code P0982 indicates a problem with the Shift Solenoid Valve ‘D’. This can cause the Engine Light to turn on or the Service Engine Soon Warning Light to illuminate. The possible causes include a faulty solenoid valve, an open or shorted harness, or a poor electrical connection in the circuit.

To fix this issue, you should visually inspect the wiring harness and connectors for any damage.

Look for broken, bent, pushed out, or corroded pins in the connectors.

The repair time for this problem is estimated to be around 1.0 hour. It is important to address this issue promptly to prevent further damage to the transmission.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the automobile fault code: p0982.

  • The symptoms of the automobile fault code P0982 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0982 can be caused by a faulty Shift Solenoid Valve ‘D’, an open or shorted harness, or a poor electrical connection in the Shift Solenoid Valve ‘D’ circuit.

  • The fault code P0982 can be caused by the following: a faulty Shift Solenoid Valve ‘D’, an open or shorted Shift Solenoid Valve ‘D’ harness, and a poor electrical connection in the Shift Solenoid Valve ‘D’ circuit.

To fix the automobile fault code p0982, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0982, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded pins in the connectors.
  • This fix should take approximately 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code p0982 are the estimated repair time of 1.0 hour and the average hourly rate charged by auto repair shops, which ranges between $75 and $150.

The P0982 fault code refers to a problem with the control circuit for shift solenoid ‘D’ in an automobile. When the shift solenoid valves A, B, C, D, and E are activated, the hydraulic pressure circuit opens to supply or discharge hydraulic pressure to the clutches based on the status of these valves. The Powertrain Control Module (PCM) commands the driver circuit to activate the shift solenoid valve.

However, if the return signal does not match the PCM’s command, indicating a low control circuit, the PCM detects a malfunction and stores the P0982 fault code. This code signifies a potential issue with the control circuit for shift solenoid ‘D’.

What are the possible causes for the automobile fault code P0982?

If you’re seeing the engine light or service engine soon warning light on your dashboard, the fault code P0982 might be the culprit. This code is often caused by a faulty shift solenoid valve ‘D’, an open or shorted harness for the valve, or a poor electrical connection in the valve circuit. To fix this issue, start by visually inspecting the wiring harness and connectors. Look out for any damaged components and check for broken, bent, pushed out, or corroded pins in the connectors. Don’t forget to refer to the possible causes listed above for further troubleshooting.

How can I visually inspect the wiring harness and connectors to fix the issue?

To fix the issue of the Engine Light being ON or the Service Engine Soon Warning Light, start by visually inspecting the wiring harness and connectors. This can help identify the cause, which could be a faulty Shift Solenoid Valve ‘D’, an open or shorted harness, or a poor electrical connection in the circuit. Check for any damaged components and look closely for broken, bent, pushed out, or corroded pins in the connectors. This thorough inspection will help pinpoint the problem and guide you towards the appropriate fix.

What should I look for when checking for damaged components or corroded connector pins?

When checking for damaged components or corroded connector pins, there are a few key things to look out for. If you’re experiencing the symptom of the engine light being on, it could be caused by a faulty shift solenoid valve ‘D’, an open or shorted harness, or a poor electrical connection in the circuit. To fix this issue, visually inspect the related wiring harness and connectors. Pay close attention to any damaged components and be on the lookout for broken, bent, pushed out, or corroded connector pins.

p0982 error fault code explained

If you’re seeing the Engine Light ON or Service Engine Soon Warning Light, it could be due to a faulty Shift Solenoid Valve ‘D’, an open or shorted harness, or a poor electrical connection in the Shift Solenoid Valve ‘D’ circuit. To fix this, visually inspect the wiring harness and connectors, check for damaged components, and look for any broken, bent, pushed out, or corroded connector pins.

Scroll to Top