[SOLVED] P0968 Code: Fixing Pressure Control Solenoid Valve Circuit Open Issue

The automobile fault code P0968 indicates a problem with the Control Solenoid Valve Assembly in the transmission.

This can cause the Engine Light to turn on or the Service Engine Soon Warning Light to illuminate. The most common causes of this fault code are low transmission fluid, a faulty Control Solenoid Valve Assembly, an open or shorted harness, or a poor electrical connection. To fix this issue, you should visually inspect the wiring harness and connectors for any damage.

Look for broken, bent, pushed out, or corroded pins on the connectors.

This repair is of moderate importance and difficulty, with an estimated repair time of 1.0. It is crucial to address this issue promptly to prevent further damage to the transmission.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the automobile fault code: p0968.

  • The symptoms of the automobile fault code P0968 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0968 can be caused by low transmission fluid, a faulty Control Solenoid Valve Assembly, an open or shorted harness, or a poor electrical connection.

  • The fault code P0968 can be caused by the following: – Low transmission fluid.
  • – Faulty Control Solenoid Valve Assembly.
  • – Control Solenoid Valve Assembly harness is open or shorted.
  • – Control Solenoid Valve Assembly circuit poor electrical connection.

To fix the automobile fault code p0968, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0968, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code p0968 are the estimated repair time of 1.0 hour and the typical auto repair shop charges between $75 and $150 per hour.

The P0968 fault code refers to a problem with the pressure control solenoid valve 3 control circuit. This solenoid is responsible for regulating and directing oil pressure to the 4-5-6 clutch regulator valve and 4-5-6 clutch boost valve.

By increasing or decreasing the current to the solenoid, the oil pressure can be adjusted accordingly. The Transmission Control Module controls the current to the solenoid through a low side driver. The power for the solenoid is supplied by the Transmission Control Module through a high side driver, which protects the circuit and components from excessive current flow.

If excessive current flow is detected, the high side driver will turn off, but it will reset once the fault is corrected.

What are the possible causes of the automobile fault code P0968?

If you’re seeing the engine light on or the service engine soon warning light, the fault code P0968 could be the culprit. This code can be caused by a few different things, including low transmission fluid, a faulty control solenoid valve assembly, an open or shorted harness for the control solenoid valve assembly, or a poor electrical connection in the circuit. To fix this issue, start by checking the possible causes mentioned above. Take a close look at the wiring harness and connectors, checking for any damage or broken pins.

How can I visually inspect the wiring harness and connectors to fix the P0968 fault code?

If you’re dealing with the P0968 fault code and your engine light is on, it’s time to take action. The cause could be low transmission fluid, a faulty control solenoid valve assembly, an open or shorted harness, or a poor electrical connection. To fix it, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, such as broken or bent pins, corrosion, or components that are out of place. Don’t forget to check the “Possible Causes” mentioned earlier. It’s time to get hands-on and find the solution!

What should I look for when checking for damaged components and connector’s pins to resolve the P0968 fault code?

When resolving the P0968 fault code, start by checking for the following: low transmission fluid, a faulty Control Solenoid Valve Assembly, an open or shorted Control Solenoid Valve Assembly harness, or a poor electrical connection in the Control Solenoid Valve Assembly circuit. To do this, visually inspect the wiring harness and connectors, looking for any signs of damage. Pay close attention to the connector’s pins, checking for any that are broken, bent, pushed out, or corroded.

p0968 error fault code explained

If your engine light is on and you’re experiencing issues with your transmission, it could be due to low transmission fluid or a faulty Control Solenoid Valve Assembly.

To fix this, visually inspect the wiring harness and connectors for any damage, and check for broken or corroded pins.

Scroll to Top