[SOLVED] P0960 Code: Fix Line Pressure Control Solenoid Valve Circuit Open!

The automobile fault code P0960 indicates a problem with the Control Solenoid Valve Assembly in the transmission. This can cause the Engine Light or Service Engine Soon Warning Light to turn on.

The most common causes of this fault code are low transmission fluid, a faulty Control Solenoid Valve Assembly, an open or shorted harness, or a poor electrical connection. To fix this issue, you should visually inspect the wiring harness and connectors for any damage.

Look for broken, bent, pushed out, or corroded pins on the connectors. This repair is of moderate importance and difficulty, with an estimated repair time of 1.0.

It is crucial to address this issue promptly to prevent further damage to the transmission.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

If you see the Engine Light ON or the Service Engine Soon Warning Light, it could be a sign of the p0960 fault code.

  • The symptoms of the automobile fault code P0960 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0960 can be caused by low transmission fluid, a faulty Control Solenoid Valve Assembly, an open or shorted harness, or a poor electrical connection.

  • The fault code P0960 can be caused by the following: 1.
  • Low transmission fluid.
  • 2.
  • Faulty Control Solenoid Valve Assembly.
  • 3.
  • Control Solenoid Valve Assembly harness is open or shorted.
  • 4.
  • Control Solenoid Valve Assembly circuit poor electrical connection.

To fix the automobile fault code p0960, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0960, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code P0960 are the estimated repair time of 1.0 hour and the average hourly rate charged by auto repair shops, which ranges between $75 and $150.

The P0960 fault code refers to an issue with the line pressure control solenoid valve control circuit in the transmission. This solenoid is responsible for regulating and directing the oil pressure that controls the transmission line pressure.

By increasing or decreasing the current to the solenoid, the line pressure can be adjusted accordingly. The fault code is triggered when the Transmission Control Module detects an open circuit on the line pressure control solenoid valve control circuit for at least 1 second. This means that there is a problem with the electrical connection or wiring related to the solenoid.

To fix this issue, the first step is to inspect the wiring and connectors for any damage or loose connections. If any issues are found, they should be repaired or replaced as necessary.

If the wiring and connectors are in good condition, the next step is to test the line pressure control solenoid valve itself.

If it is found to be faulty, it will need to be replaced.

Once the necessary repairs or replacements have been made, the fault code should be cleared and the system should be retested to ensure that the issue has been resolved.

What are the possible causes of the automobile fault code P0960?

If you see the engine light or service engine soon warning light on, the fault code P0960 could be the culprit. This code can be caused by a few different things, including low transmission fluid, a faulty control solenoid valve assembly, an open or shorted harness for the control solenoid valve assembly, or a poor electrical connection in the control solenoid valve assembly circuit. To fix the issue, start by checking the possible causes mentioned above. Take a close look at the wiring harness and connectors, checking for any damage or corrosion. Also, inspect the components for any signs of breakage or bending.

How can I visually inspect the wiring harness and connectors to fix the P0960 fault code?

If you’re dealing with the P0960 fault code and your engine light is on, it’s time to take action. The cause could be low transmission fluid, a faulty control solenoid valve assembly, an open or shorted harness, or a poor electrical connection. To fix it, start by visually inspecting the wiring harness and connectors. Look for any signs of damage, like broken or bent pins, corrosion, or components that are out of place. Don’t forget to check the “Possible Causes” mentioned earlier. It’s time to get hands-on and find the solution!

What should I look for when checking for damaged components and connector’s pins to resolve the P0960 fault code?

When resolving the P0960 fault code, start by checking for damaged components and connector’s pins. Visually inspect the related wiring harness and connectors, looking for any signs of damage such as broken, bent, pushed out, or corroded pins. This can help identify any issues with the Control Solenoid Valve Assembly or its circuit. By addressing these potential causes, you can effectively fix the problem and clear the Engine Light or Service Engine Soon Warning Light.

p0960 error fault code explained

If your engine light is on and you’re experiencing issues with your transmission, it could be due to low transmission fluid or a faulty Control Solenoid Valve Assembly.

To fix this, visually inspect the wiring harness and connectors for any damage, and check for broken or corroded pins.

Scroll to Top