[SOLVED] P0954 Code: Fix Intermittent Auto Shift Manual Control Circuit Issue

The automobile fault code P0954 indicates a problem with the Auto Shift Manual Switch. When this fault occurs, the Engine Light or Service Engine Soon Warning Light will turn on. The cause of this issue could be a faulty switch, an open or shorted harness, or a poor electrical connection in the switch circuit.

To fix this problem, you should visually inspect the wiring harness and connectors for any damage.

Look for broken, bent, pushed out, or corroded pins in the connectors.

This repair is of moderate importance and difficulty, with an estimated repair time of 1.0. To interpret the fault code, check the “Possible Causes” listed above and follow the recommended steps for inspection and repair.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p0954 fault code.

  • The symptoms of the automobile fault code P0954 include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The automobile fault code p0954 can be caused by a faulty Auto Shift Manual Switch, an open or shorted harness, or a poor electrical connection in the circuit.

  • The fault code P0954 can be caused by the following: a faulty Auto Shift Manual Switch, an open or shorted harness for the Auto Shift Manual Switch, and a poor electrical connection in the Auto Shift Manual Switch circuit.

To fix the automobile fault code p0954, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p0954, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors for any damage.
  • Look for broken, bent, pushed out, or corroded pins in the connectors.
  • This fix should take approximately 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code p0954 are the estimated repair time of 1.0 hour and the typical auto repair shop charges of $75 to $150 per hour.

The P0954 fault code refers to a problem with the Auto Shift Manual Control Circuit. This code is set by the Transmission Control Module (TCM) when it detects that the signal from the Auto Shift Manual Switch is not within the factory specifications.

The Auto Shift Manual Switch is responsible for controlling the shifting of gears in the transmission. When this switch malfunctions or sends an intermittent signal, it can cause issues with the shifting process. If you encounter the P0954 fault code, it is important to have the Auto Shift Manual Control Circuit inspected and repaired.

Ignoring this issue can lead to difficulties in shifting gears, which can affect the overall performance and safety of your vehicle.

What are the possible causes for the automobile fault code P0954?

If you see the engine light or service engine soon warning light on, the fault code P0954 could be the culprit. This code is often caused by a faulty auto shift manual switch or issues with the switch’s harness, such as an open or shorted circuit. To fix the problem, start by visually inspecting the wiring harness and connectors. Look for any signs of damage or corrosion, and check for broken or bent pins on the connectors.

How can I visually inspect the wiring harness and connectors to fix the issue?

To fix the issue of the Engine Light being ON or the Service Engine Soon Warning Light, start by checking the possible causes, such as a faulty Auto Shift Manual Switch or an open or shorted harness. Then, visually inspect the wiring harness and connectors for any signs of damage. Look out for broken, bent, pushed out, or corroded pins on the connectors. This thorough inspection will help identify and resolve the issue effectively.

What should I look for when checking for damaged components or corroded connector pins?

When troubleshooting an engine light or service engine soon warning light, it’s important to check for damaged components and corroded connector pins. These issues can be the cause of a faulty auto shift manual switch or poor electrical connection in the auto shift manual switch circuit. To fix the problem, visually inspect the wiring harness and connectors, paying close attention to any signs of damage. Look for broken, bent, pushed out, or corroded pins on the connectors.

p0954 error fault code explained

If your engine light is on and you’re seeing the P0954 fault code, it could be due to a faulty Auto Shift Manual Switch or issues with the wiring harness and connectors.

To fix it, visually inspect the wiring and connectors for any damage or corrosion.

Look out for broken or bent pins as well.

Scroll to Top