[SOLVED] Fix P045B Code: Resolve Exhaust Gas Recirculation ‘b’ Control Circuit Issues

The automobile fault code P045B indicates a problem with the EGR volume control solenoid valve. This can cause the engine light to turn on or the service engine soon warning light to illuminate.

The possible causes include an open or shorted harness, poor electrical connection, or an issue with the EGR temperature sensor and circuit.

To fix this issue, visually inspect the wiring harness and connectors for any damage. Look for broken, bent, pushed out, or corroded pins on the connectors.

The repair time for this issue is estimated to be around 1.0. It is important to address this problem promptly to prevent further damage to the vehicle.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

When the engine light is on or the service engine soon warning light is illuminated, it could be a sign of the p045b fault code.

  • The symptoms of the automobile fault code p045b include the Engine Light being ON or the Service Engine Soon Warning Light being illuminated.

The fault code p045b can be caused by issues with the EGR volume control solenoid valve, its harness, circuit, and the EGR temperature sensor.

  • The fault code p045b can be caused by the following: – EGR volume control solenoid valve malfunction – Open or shorted harness of the EGR volume control solenoid valve – Poor electrical connection in the EGR volume control solenoid valve circuit – Issues with the EGR temperature sensor and its circuit.

To fix the p045b fault code, start by visually inspecting the wiring harness, connectors, and components for any damage or corrosion.

  • To fix the automobile fault code p045b, start by checking the possible causes mentioned above.
  • Then, visually inspect the wiring harness and connectors related to the issue.
  • Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins.
  • This fix is estimated to take approximately 1.0 hour.

The factors influencing the diagnosis and fixing cost of the automobile fault code p045b are the estimated repair time and the hourly rate charged by auto repair shops. The estimated repair time for this fault code is 1.0 hour.

Auto repair shops typically charge between $75 and $150 per hour for their services.

These factors will determine the overall cost of diagnosing and fixing the p045b fault code.

The P045B fault code refers to the Exhaust Gas Recirculation (EGR) ‘B’ Control Circuit RangePerformance.

This code is related to the EGR system in the vehicle. The EGR system includes components such as the EGR Valve, Engine Control Module (ECM) Controlled Vacuum Switch Valve or EGR Solenoid, and EGR Vacuum Modulator.

These components work together to regulate the opening and closing of the EGR Valve, depending on the engine and driving conditions.

In newer vehicles, a step motor is used to control the flow rate of EGR from the exhaust manifold.

This motor has four winding phases and operates based on the pulse signal from the ECM. By turning the windings on and off in sequence, the valve opens or closes, changing the flow rate.

If no change in the flow rate is needed, the ECM issues a certain voltage signal to keep the valve at a specific opening. When the P045B fault code is triggered, it indicates that there is an issue with the control circuit of the EGR system.

This could be due to a range or performance problem, which may affect the proper functioning of the EGR valve and the flow rate of EGR.

It is important to diagnose and fix this issue to ensure the EGR system operates correctly and helps reduce emissions.

What are the possible causes for the automobile fault code p045b and how can I visually inspect them?

If you’re seeing the engine light on or the service engine soon warning light, the fault code P045B could be the culprit. This code is often caused by issues with the EGR volume control solenoid valve, its harness, or the electrical connection. To visually inspect these potential causes, check the wiring harness and connectors for any damage. Look out for broken, bent, pushed out, or corroded pins on the connectors. By conducting this inspection, you can identify any issues and take the necessary steps to fix them.

How can I determine if the EGR volume control solenoid valve harness is open or shorted and what should I do if it is?

If you’re experiencing the symptom of the Engine Light being ON or the Service Engine Soon Warning Light, it could be due to a problem with the EGR volume control solenoid valve. To determine if the issue lies with the EGR volume control solenoid valve harness being open or shorted, you should visually inspect the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. This will help you identify the cause of the problem and take appropriate action to fix it.

What steps should I take to check the EGR temperature sensor and circuit for any issues and how can I identify damaged components or corroded connector pins?

To check the EGR temperature sensor and circuit for any issues, start by visually inspecting the related wiring harness and connectors. Look for any damaged components and check for broken, bent, pushed out, or corroded connector pins. These issues can cause the Engine Light to turn on. By identifying and addressing these problems, you can fix the EGR temperature sensor and circuit and ensure optimal performance of your vehicle.

p045b error fault code explained

If you’re seeing the Engine Light ON or the Service Engine Soon Warning Light, the issue could be with the EGR volume control solenoid valve or its related components.

To fix it, visually inspect the wiring harness and connectors for any damage. Also, check for broken, bent, pushed out, or corroded connector pins.

Scroll to Top