The OBD code B132C for Ford indicates an issue with the Right Stop/Turn Lamp circuit.
Symptoms include the Engine Light being ON.
Causes may include a faulty lamp, harness issues, poor electrical connections, or problems with related components like the BCM.
This is a moderate issue that should be addressed promptly.
A possible fix involves inspecting and repairing the wiring harness and connectors associated with the Right Stop/Turn Lamp circuit.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Ford b132c OBD Code
The Ford B132C fault code indicates a potential issue with the vehicle’s ambient air temperature sensor.
- Symptoms: Service Engine Soon Warning Light may illuminate.
- Loss of communication with the smart junction box module.
- Vehicle accessories like interior lights or power windows may not work properly.
Causes of the Ford b132c OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Ford B132C include faulty seat belt buckle switch or wiring issues.
- B132C can be caused by a faulty Right Stop/Turn Lamp.
- A Right Stop/Turn Lamp harness that is open or shorted.
- A Right Stop/Turn Lamp circuit with a poor electrical connection.
- A faulty High Mounted Stop Lamp.
- A faulty Stop Lamp Switch.
- Or a faulty Body Control Module (BCM).
Fixing Ford Error Code b132c Step By Step
To address fault code B132C on a Ford, inspect and repair the HVAC temperature blend door actuator.
- To fix the Ford OBDII code B132C, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the code.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no visible issues are found, consider resetting the module that is associated with the code.
- Perform any necessary software updates or reprogramming procedures.
- If the problem persists, consider replacing the module if deemed necessary.
Cost Of Fixing Ford b132c Fault Code
Diagnosing and repairing fault code B132C on a Ford may involve replacing a faulty seat belt buckle switch.
The cost to diagnose and fix the Ford OBD code B132C depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150, excluding parts.
Costs may vary based on shop rates and the complexity of the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Ford b132c OBD Code
Ford code B132C relates to a fault in the vehicle’s exterior lamp control module.
Ford OBD code B132C means Door Ajar Circuit Short to Ground.
This code is triggered by the Body Control Module (BCM) when it detects a short to ground in the circuit related to the door ajar sensor.
The door ajar sensor is part of the vehicle’s interior lighting and security system, which alerts the driver if a door is not fully closed.
When this circuit has a short to ground, it can cause issues with the interior lights, door ajar warning, and potentially affect the vehicle’s security system.
Mechanic’s Tech Notes
Detailed information on Ford fault code B132C, including symptoms, causes, and repair procedures.
To diagnose and fix OBDII code B132C in a Ford vehicle, start by visually inspecting the wiring harness and connectors related to the Transmission Control Module (TCM).
Look for any damage or corrosion on the connector pins.
Use a multimeter to check the power and ground connections to the TCM.
Additionally, use a scan tool to confirm if the TCM is communicating over the Controller Area Network (CAN) network.
If necessary, consider reprogramming or reflashing the TCM.
This process can help identify and address issues related to the TCM that may be triggering the B132C fault code.
FAQ
OBD code B132C in a Ford indicates an issue with the Right Stop/Turn Lamp circuit. Check for faults in the lamp, harness, connections, or BCM.
Diagnose OBD code B132C in Ford for Engine Light ON. Check Right Stop/Turn Lamp, harness, connections. Inspect for faults, damage, corrosion. Review and repair as needed.
To fix OBD code B132C in a Ford vehicle with Engine Light ON, check and repair faulty right stop/turn lamp, harness, connections, high mounted stop lamp, stop lamp switch, or BCM.
Wrap Up
If your Ford is displaying OBD code b132c and you’re experiencing issues with the vehicle’s climate control system, it could be caused by a faulty ambient temperature sensor, damaged wiring in the ambient temperature sensor circuit, or a poor connection at the sensor or module.
To address Ford OBD code b132c, start by inspecting the ambient temperature sensor and its wiring for any visible damage.
Test the sensor’s resistance and ensure proper connection at the sensor and module.
Replace the sensor if necessary and repair any damaged wiring in the circuit.
