OBD code B1395 indicates a problem with the Body Control Module (BCM).
Symptoms include the Engine Light being ON.
Common causes are low battery voltage, a faulty BCM, open or shorted BCM harness, or poor electrical connections.
This issue is moderate in seriousness.
To fix it, inspect the wiring harness and connectors for damage or corrosion, and check connector pins for any issues.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the b1395 OBD Code
The vehicle displays an airbag warning light on the dashboard with fault code B1395 stored.
- Symptoms: Service Engine Soon Warning Light ON.
- Intermittent loss of communication with the body control module.
- Vehicle may not start.
- Horn may sound continuously.
Causes of the b1395 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code B1395 include issues with the driver’s airbag circuit.
- B1395 can be caused by low battery voltage.
- A faulty Control Module.
- An open or shorted Control Module harness.
- Or a poor electrical connection in the Control Module circuit.
Fixing Error Code b1395 Step By Step
To address fault code B1395, inspect and repair the passenger airbag circuit for any faults.
- To fix OBDII code B1395, review the possible causes related to the code.
- Visually examine the wiring harness and connectors associated with the code.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Repair or replace any damaged wiring or connectors found during the inspection.
- Clear the fault code from the vehicle’s computer using a scan tool.
- Test drive the vehicle to verify if the issue has been resolved.
Cost Of Fixing b1395 Fault Code
Diagnosing and repairing fault code B1395 may involve inspecting and testing the vehicle’s airbag system components.
The cost to diagnose and fix OBD code B1395 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity of the repair can influence the final cost.
Details of the b1395 OBD Code
B1395 indicates a fault in the driver’s airbag circuit.
OBD code B1395 means Device Voltage Reference Output 3 Circuit Short to Ground.
This code is triggered when the Body Control Module (BCM) detects a short to ground in the circuit for the voltage reference output 3. This circuit is typically used to provide a stable voltage reference for various sensors and components in the vehicle’s electrical system.
When a short to ground is detected in this circuit, it can cause issues with the operation of these sensors and components, leading to various electrical system malfunctions.
Mechanic’s Tech Notes
Code B1395 indicates a problem with the driver’s airbag circuit, requiring thorough inspection and diagnosis.
To diagnose and fix OBDII code B1395, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection will help identify and address any issues causing the B1395 fault code.
FAQ
OBD code B1395 indicates a Control Module circuit issue. Symptoms include Engine Light ON. Causes may be low battery voltage or faulty Control Module. Fix: Inspect wiring and connectors.
Common symptoms of OBD code B1395 include Engine Light ON. Possible causes are low battery voltage, faulty Control Module, or issues with Control Module wiring. Fix: Inspect wiring and connectors.
Diagnose OBD code B1395 by checking for low battery voltage, faulty Control Module, or wiring issues. Inspect harness, connectors, and components for damage or corrosion.
Wrap Up
If your vehicle is displaying OBD code b1395, you may experience issues with the driver’s door ajar switch circuit.
This could be caused by a faulty door ajar switch, damaged wiring, or poor connections in the circuit.
To address OBD code b1395, start by inspecting the driver’s door ajar switch and its wiring harness for any signs of damage or corrosion.
Test the switch for proper operation and ensure all connectors are securely attached.
Replace the switch if necessary and repair any damaged wiring to resolve the issue.
