OBD code B1065 indicates an issue with the Assist Air Bag Module.
Symptoms include the Air Bag Warning Light being ON.
Causes may include a faulty module, open/shorted harness, poor electrical connection, or a faulty Diagnosis Sensor Unit.
This is a serious issue that affects the safety system.
To fix, inspect wiring harness, connectors, and components for damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the b1065 OBD Code
The vehicle displays an airbag warning light on the dashboard.
- Symptoms: Air Bag Warning Light ON
Causes of the b1065 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code B1065 include issues with the passenger airbag module.
- B1065 can be caused by a faulty Assist Air Bag Module.
- An open or shorted Assist Air Bag Module harness.
- A poor electrical connection in the Assist Air Bag Module circuit.
- A faulty Diagnosis Sensor Unit.
Fixing Error Code b1065 Step By Step
Address the issue by inspecting the driver’s airbag module and related wiring for fault code B1065.
- To fix OBDII code B1065, first, review the possible causes related to the code.
- Visually inspect the wiring harness and connectors associated with the airbag module.
- Check for any damaged components and ensure the connector pins are not broken, bent, pushed out, or corroded.
- If no issues are found with the wiring and connectors, consider resetting the airbag module using a professional scan tool.
- If the problem persists after the reset, the airbag module may need to be replaced with a new or remanufactured unit.
Cost Of Fixing b1065 Fault Code
Diagnosing and repairing fault code B1065 may involve inspecting and potentially replacing the passenger airbag module.
The cost to diagnose and fix OBD code B1065 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity of the repair can influence the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the b1065 OBD Code
B1065 code indicates a fault in the passenger airbag module communication circuit.
OBD code B1065 means Left Rear Turn Signal Lamp Circuit Short to Ground.
This code is triggered by the Body Control Module (BCM) when it detects a short to ground in the circuit for the left rear turn signal lamp.
The BCM monitors the circuit for abnormalities and sets this code when a short to ground is detected in the left rear turn signal lamp circuit.
Mechanic’s Tech Notes
Code B1065 relates to the passenger airbag module deployment loop resistance being out of range.
To diagnose and fix OBDII code B1065, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection will help identify and address any issues causing the B1065 fault code.
FAQ
OBD code B1065 indicates a fault with the Assist Air Bag Module. Symptoms include Air Bag Warning Light ON. Check wiring harness, connectors, and components for issues.
Common symptoms of OBD code B1065 include Air Bag Warning Light ON. Causes may be a faulty Assist Air Bag Module or related wiring issues. Fix: Inspect and repair wiring connections.
Diagnose OBD code B1065 by checking for a faulty Assist Air Bag Module, open/shorted harness, or poor connection. Inspect wiring and connectors for damage.
Wrap Up
If your airbag warning light is on and you see OBDII code b1065, it may indicate a fault in the passenger airbag off indicator circuit.
This could be caused by a defective passenger airbag off indicator, damaged wiring, or poor connections in the system.
To address OBDII code b1065, check the wiring harness and connectors for any signs of damage or corrosion.
Test the passenger airbag off indicator for proper operation and replace if necessary.
Ensure all connections are secure and free of debris to resolve the issue effectively.
